Medical waste is posing a growing problem all over the world, jeopardizing the health of staff, patients, disposal workers and anyone else coming into contact with the often hazardous materials discarded by hospitals and other healthcare sites. Hospital waste varies from site to site and the biggest challenge is to dispose of this wide range of waste streams. Incineration is still the preferred way to process medical waste without endangering the heath patients, staff or anyone else coming into contact with them. Clinical waste is costing more and more to dispose of safely. Health Clinics and Health center can now handle their own waste streams using one of our specialist medical incinerators. Destroying hazardous waste at source is by far the most effective and efficient way of handling waste that could potentially spread diseases or viruses.
Average 20%-25% of the total waste generated by healthcare establishments is regarded as hazardous and may create a variety of health and environmental risks if not managed and destroyed in an appropriate manner.
With years worth of experience in this sector, our medical range of incinerators are designed to cater for the economical needs of small clinics to the more demanding and specialized requirements of large hospitals in their waste management processes.
Burring Capacity 100 / 200 KG/ hr
Number of Burner 02 Nos
Incinerator Type Dual Chamber
Primary Chamber
Secondy Chamber
Incinerator Design Controlled Air
Fuel to be used Natural Gas / Deisel
Loading System Manual / Batch Type
Warmer Time 20 minutes
Type of Paint Heat Resistance enamel paint
Chamber Plate Thickness 6mm
Chimney Plate Thickness 5mm
Thermal Insulation 100 mm
Refractory Thickness 100mm
Electricity 3 phase 440V
Composition of thermal insulator Calcium Silicate slab
Composition of refractory High Alumna Cast able 46% AL 2.03
Number of Blowers 02 Nos
Temperature controller 02 Nos of digital temperature controller
Thermocouple 02 Nos
Warranty Period 3 Years
Chimney Height 40 Ft (first 10 ft SS)
(24 inches diameter)
Scrubber Wet Scrubber with high pressure water injection
Smokeless Odorless
Number of Burner 02 Nos
Incinerator Type Dual Chamber
Primary Chamber
Secondy Chamber
Incinerator Design Controlled Air
Fuel to be used Natural Gas / Deisel
Loading System Manual / Batch Type
Warmer Time 20 minutes
Type of Paint Heat Resistance enamel paint
Chamber Plate Thickness 6mm
Chimney Plate Thickness 5mm
Thermal Insulation 100 mm
Refractory Thickness 100mm
Electricity 3 phase 440V
Composition of thermal insulator Calcium Silicate slab
Composition of refractory High Alumna Cast able 46% AL 2.03
Number of Blowers 02 Nos
Temperature controller 02 Nos of digital temperature controller
Thermocouple 02 Nos
Warranty Period 3 Years
Chimney Height 40 Ft (first 10 ft SS)
(24 inches diameter)
Scrubber Wet Scrubber with high pressure water injection
Smokeless Odorless
